Support Scanners DS Series Epson WorkForce DS-780N

How do I scan using my product's control panel?

  • You can scan an original from the control panel using jobs created in Document Capture Pro or Document Capture. Set the operation mode on the control panel before scanning.
    1. Make sure you installed the product software and connected the product to your computer or network.

      Note: Restart your computer after installing the product software to enable scanning from the control panel.

    2. Place your original on the product for scanning.
    3. Press the  home button, if necessary.
    4. Select Scan.
    5. Select the computer on which you created the jobs in Document Capture Pro or Document Capture.

      Note: If the scanner is connected via USB or the operation mode is set to Server, you do not need to select a computer.

    6. Select a job. You see a screen like this:

    7. If you want to change the scan settings, select Settings.
    8. Select from the following options:
      • To change the job settings, select Edit. Change the scan settings as necessary.

        Note: Make sure the Disable job setting changes on the control panelsetting is not selected in Document Capture Pro or Document Capture.

      • To skip double feed detection when scanning originals such as envelopes or plastic cards, set the DFDS Function setting to On.
      • To slow down the scanning speed, set the Slow setting to On.
    9. Select the Start icon.
Published:  22-Jun-2017 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.