Support Scanners WorkForce Series Epson WorkForce ES-400 II

What do my product's lights indicate?

  • See the table below.

    Scanner Light Status

    You can often diagnose problems with your scanner by checking its lights.

    ES-400 II



    1 ! error light
    2  automatic feeding mode light
    3  ready light
    4  double feed detection skip light
    5  slow mode light

    ES-500W II



    1  AP mode light
    2  Wi-Fi light
    3 ! error light
    4  automatic feeding mode light
    5  ready light
    6  double feed detection skip light
    7  slow mode light
    Light status Condition/solution
    The ! error light is flashing slowly A paper jam or a double feed has occurred. Remove any paper loaded in the input tray. If the light continues to flash, a scanner error may have occurred. Turn the scanner off and then back on again. If the error continues, contact Epson for support.
    The ! error light is on The scanner cover is open. Make sure the scanner cover is closed and there is no jammed paper inside.
    The following lights are flashing quickly:
    • ! error
    •  ready
    •  AP mode (ES-500W II)
    •  Wi-Fi (ES-500W II)
    A fatal error has occurred. Try the following:
    • Check the scanner connection to your computer to make sure it is secure.
    • Turn the scanner off and then back on again. If the error continues, the scanner may be malfunctioning. Contact Epson for support.
    The  ready light is off and the following lights are on:
    • ! error
    •  automatic feeding mode
    •  double feed detection skip
    •  slow mode
    •  AP mode (ES-500W II)
    •  Wi-Fi (ES-500W II)
    The firmware update has failed and the scanner is in recovery mode. Try updating the firmware again.
    The  Wi-Fi and ! error lights are flashing slowly (ES-500W II) An access point settings error (security error) has occurred. Press the  stop button to clear the error, restart the devices you want to connect to the network, then reconnect to the network.
    The  Wi-Fi light is flashing slowly and ! error light is on (ES-500W II)
    The  Wi-Fi (white) and ! error lights are flashing slowly (ES-500W II) A network connection error has occurred (the date and time have not been set correctly). Reset the date and time in Web Config.

    Related references
    Original Jams in Scanner
    Where to Get Help (U.S. and Canada)
    Where to Get Help (Latin America)
    Related information
    Loading Originals
    Wi-Fi Networking
    Scanning
Published:  21-Jan-2021 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.