How do I load plastic cards in the input tray?

• You can load plastic and laminated cards that meet the card specifications in the input tray.
  1. Make sure the scanner position light is on.
     

     Note: If the scanner position light is off, pull the position selector to the right and tilt the scanner backwards.
     

  2. Open the input tray.
     
  3. Raise the input tray extension.
     
  4. Slide the input tray edge guides all the way out.
     
  5. Load plastic or laminated cards (printed side up and long edge first) into the input tray horizontally, and slide them in until they meet resistance.
     

     Note: Do not load plastic cards vertically.

  6. Adjust the edge guides to fit the edges of the original so that there are no gaps. Otherwise, the original may skew.
     
  7. Select the card type and turn off the Detect Double Feed setting on the Main Settings tab in Epson Scan 2.

     Note: If you do not disable the Detect Double Feed setting and a double feed error occurs, remove the plastic or laminated card from the input tray and reload it.

  Related references
  Scanner Positions