What settings do the DIP switches control?

• The DFX-8000 has three 8-position DIP switches. These switches are located at the lower front cover of the printer under a small access door.
  
  

  Switch	ON	OFF
  SW 1-1	Condensed	10 Pitch
  SW 1-2	Slashed Zero	Normal Zero
  SW 1-3	Graphic Characters	Italic Characters
  SW 1-4	IBM Emulation	Epson ESC/P
  SW 1-5	NLQ	Draft

  
  

  Country	SW 1-6	SW 1-7	SW 1-8
  USA	ON	ON	ON
  France	ON	ON	OFF
  Germany	ON	OFF	ON
  United Kingdom	ON	OFF	OFF
  Denmark	OFF	ON	ON
  Sweden	OFF	ON	OFF
  Italy	OFF	OFF	ON
  Spaln	OFF	OFF	OFF

  
  

  Switch	ON	OFF
  SW 2-1	User Defined Character Set	ROM Character set
  SW 2-2	Normal Draft	High Speed Draft
  SW 2-3	7 Bit serial word length	8 Bit serial word length
  SW 2-4	CR Produces CR + LF	CR Only

  
  

  Interface	SW 2-5	SW 2-6
  Parallel	OFF	OFF
  Serial/Odd	OFF	ON
  Serial/Even	ON	OFF
  Serial/None	ON	ON
  Baud	SW2-7	SW2-8
  19200	OFF	OFF
  9600	OFF	ON
  1200	ON	OFF
  300	ON	ON

  
  

  Switch	ON	OFF
  SW 3-1 Input Buffer	Valid	Invalid
  SW 3-2 Page Length	12 inches	11 inches
  SW 3-3 1-inch skip over perf	Valid	Invalid
  SW 3-4 Paper Memory	Memory 2	Memory 1

  
  

  Switch	ON	OFF
  SW 3-5 Overlapping Multi-part forms	Valid	Invalid
  SW 3-6 Multi-part forms with labels	Valid	Invalid
  SW3-7 Ski over binding	ON	OFF
  SW 3-8 Handshaking protocol	X-on/X-off	DTR