How do I manually assign a static IP address to my product?

  • Do the following:
    Windows
    1. Download and install the EpsonNet Config Utility from the Downloads tab for your product.
    2. Select Start > Programs > EpsonNet > EpsonNet Config.
    3. Highlight your printer's name, then click Configuration.
    4. Select Basic (under TCP/IP) and make sure Manual is selected. Enter the IP Address, Subnet Mask and Default Gateway in the IP Address Setting section.
    5. Click Send
    6. Close EpsonNet Config.
    Macintosh
    1. Download and install the EpsonNet Config Utility from the Downloads tab for your product.
    2. Open the Hard Drive. Select Applications > EpsonNet > EpsonNet Config v3 > EpsonNet.
    3. Highlight your printer, then click Configuration.
    4. Select Basic (under TCP/IP) in the Device Properties window.
    5. Select Manual. Enter the IP Address, Subnet Mask and Default Gateway in the IP Address Setting section.
    6. Click Transmit.
    7. Close EpsonNet Config.
Published:  Jun 17, 2010 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​