I've installed my product software for a wireless connection, but I cannot print. When I check my product's control panel, there is no IP assigned to my product (it's 0.0.0.0) or the IP starts with 169.254.xxx.xxx . What should I do?

• This problem indicates that the router (wireless network) did not communicate with the product when you installed the software. Try these solutions:
  1. Reset the product's Network Settings.
  2. Reset your router. You may be able to do this by turning it off and back on again, or you may need to follow a different procedure to reset it. See the documentation for your router or access point for instructions.
  3. Troubleshoot the Ethernet connection by doing the following:
     • Make sure the product is connected to the router with an Ethernet cable (one is included with your product) when you install the software.
     • Try another Ethernet cable.
     • Connect the Ethernet cable to another port on the router.
  4. Reinstall the software.
  Related references
  Resetting Control Panel Defaults
  Selecting Wireless Network Settings From the Control Panel