Can I connect my product to my wireless network using the buttons on the control panel?
-
Yes. See the instructions below.
Selecting Wireless Network Settings From the Control Panel
You can select or change wireless network settings using your product control panel.To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software. The installer program guides you through network setup.
- Press the
home button, if necessary.
- Press
.
- Select Wi-Fi Setup. You see a screen like this:
- Select Wi-Fi Setup Wizard.
Note: If you need to disable the wireless network to set up your product on an Ethernet network, scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired network connection in this guide.
- Select the name of your wireless network or enter the name manually.
Note: To enter the wireless network name manually, select Other Networks and select the Network (SSID) field. Use the displayed keypad to enter your network name.
- Select the Password field and enter your wireless password using the displayed keypad.
Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and lowercase letters, and numeric or special characters.
- Press
or 
to move the cursor.
- Press
to change the case of letters.
- Press
to delete the previous character.
- Press
to enter numbers and symbols.
- Press
to enter a space.
- Press
- Press
when you finish entering your password and select Proceed.
- Confirm the displayed network settings and select OK to save them.
Note: If you need to change a setting, press the
back button.
- If you want to print a network setup report, press one of the
buttons. (Otherwise, select Done.)
- Press the home button to return to the Home screen. If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is lit as shown.
Control Panel Buttons and Lights
- Press the