Support Printers All-In-Ones WorkForce Series Epson WorkForce Pro WF-5690

Can I connect my product to my wireless network using the buttons on the control panel?

  • Yes. See the instructions below.

    To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software by downloading it from the Epson website. The installer program guides you through network setup.

    Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your fax and network data and settings.

    1. Press the home button, if necessary.
    2. Press .
    3. Select Wi-Fi Setup. You see a screen like this:
    4. Select Wi-Fi Setup Wizard.

      Note: If you need to disable the wireless network to set up your product on an Ethernet network, scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired network connection in this guide.

    5. Select the name of your wireless network or enter the name manually.

      Note: To enter the wireless network name manually, select Other Networks and select the Network (SSID) field. Use the displayed keypad to enter your network name.

    6. Select the Password field and enter your wireless password using the displayed keypad.

      Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and lowercase letters, and numeric or special characters.

      • Press or to move the cursor.
      • Press to change the case of letters.
      • Press to delete the previous character.
      • Press to enter numbers and symbols.
      • Press to enter a space.
    7. Press when you finish entering your password and select Proceed.
    8. Confirm the displayed network settings and select OK to save them.

      Note: If you need to change a setting, press the  back button.

    9. If you want to print a network setup report, press one of the buttons. (Otherwise, select Done.)
    10. Press the  home button to return to the Home screen. If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is lit as shown.
    Related references
    Control Panel Buttons and Lights
Published:  27-Jun-2014 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.