How do I manually assign a static IP address to my product?
-
Do the following:
Windows
- Download and install the EpsonNet Config Utility from the Downloads tab for your product.
- Do one of the following:
- Windows 10: Click and select All apps > EpsonNet > EpsonNet Config.
- Windows 8.x: Navigate to the Apps screen and select EpsonNet Config.
- Windows (other versions): Select or Start > Programs > EpsonNet > EpsonNet Config.
- Highlight your printer's name, then click Configuration.
- Select Basic (under TCP/IP) and make sure Manual is selected. Enter the IP Address, Subnet Mask, and Default Gateway in the IP Address Setting section.
- Click Send.
- Close EpsonNet Config.
OS X
- Download and install the EpsonNet Config Utility from the Downloads tab for your product.
- Open the Hard Drive and select Applications > Epson software > EpsonNet > EpsonNet Config V4 > EpsonNet Config.
- Highlight your printer, then click Configuration.
- Select Basic (under TCP/IP) in the Device Properties window.
- Select Manual. Enter the IP Address, Subnet Mask, and Default Gateway in the IP Address Setting section.
- Click Transmit.
- Close EpsonNet Config.
Published: 18-Mar-2016
Was this helpful? Thank you for the feedback!