text.skipToContent text.skipToNavigation

I'm having paper feed problems. What should I do?

    See below.

    Paper Feeding Problems

    If you have problems feeding paper, try these solutions:

    • If paper does not feed for printing, remove it. Then reload it in the sheet feeder against the right side and beneath the tab. Slide the edge guide against the edge of the paper, making sure that the paper stack is not above the arrow mark on the edge guide.
    • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.
    • If paper jams when you load only one or two sheets, try loading more sheets at a time. Do not load more than the recommended number of sheets.
    • If paper jams when you print on both sides of the paper, try loading fewer sheets.
    • Make sure your paper meets the specifications for your product.
    • For best results, follow these guidelines:
      • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick.
      • Load paper in the sheet feeder printable side up.
      • Follow any special loading instructions that came with the paper.
    Related tasks
    Loading Paper in the Sheet Feeder
    Related references
    Paper Loading Capacity
    Paper Jam Problems Inside the Product
    Document Jams in the Automatic Document Feeder
Published:  6-Aug-2015 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address