I replaced an ink cartridge, but my product shows that the ink is not recognized. What should I do?

• The ink cartridges may not have been installed using the correct procedure, or they may not be seated correctly. Follow the instructions below to correctly install and reseat the ink cartridges.

  Note: This product is designed to use only genuine Epson-brand ink cartridges. Other brands of ink cartridges and ink supplies are not compatible and, even if described as compatible, may not function properly. Please replace any non-Epson cartridges with Genuine Epson cartridges.

  1. Turn on your product.
     • If an ink cartridge is expended, you see a message on the LCD screen. Note which cartridges need to be replaced, then press the OK button and follow the instructions on the screen.
     • If you are replacing a cartridge before you see a message on the LCD screen, press the  home button if necessary, and select Settings > Maintenance > Ink Cartridge(s) Replacement and press the OK button.
  2. Lift up the printer cover until it locks into place, then open the ink cartridge cover.
     
     

     Caution:
     Do not move the print head by hand or use any kind of tool to remove a cartridge; otherwise, you may damage your product. Do not touch the flat white cable inside the printer.

  3. Remove all the ink cartridges. Squeeze the tab on each cartridge and lift the cartridge straight up to remove it.

     Note: Make sure the yellow tape is removed from each cartridge. Remove only the yellow tape.
     
     

     Caution:
     Do not remove any other labels or seals, or ink will leak.

     Caution:
     Do not touch the green chip on the cartridge.

  4. After all the ink cartridges have been removed, reinsert them one by one and press each one down until it clicks into place.
     
     
  5. Lower the scanner unit and select Completed on the screen.
     
     

     The print head moves to its home position, and the printer starts charging the ink. This takes about 90 seconds. When you see a confirmation message on the screen, ink charging is finished. Select OK.

  If your printer still does not recognize the ink cartridges, please contact Epson Support.