How do I connect my product with a Wi-Fi Direct connection?

• See below.

  Enabling Wi-Fi Direct (Simple AP) Mode

  You can enable Wi-Fi Direct mode to allow direct communication between your product and computer, mobile devices, or other devices (up to 8) without a wireless router or access point.

  Note: Make sure the Epson Smart Panel app or another compatible Epson printing app is installed on your mobile device before connecting to the product.

  1. Press the  home button, if necessary.
  2. Press the arrow buttons to select Wi-Fi Setup and press the OK button. You see this screen:
     
  3. Press the arrow buttons to select Wi-Fi Direct and press the OK button.
  4. Press the OK button twice. The product information is displayed on the LCD screen.
     
  5. Do one of the following:
     • Open the Epson Smart Panel app on your device and use the information on the LCD screen to select your product. Skip to step 7.
     • To connect without using the Epson Smart Panel app, press the left arrow button and go to the next step.
  6. Do one of the following:
     • For iOS devices, select iOS and press the OK button. Scan the QR code with the camera app on your device and follow the instructions on your device.
     • For other types of devices, select Other OS Devices and press the OK button. Use your device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown.
  7. Press the OK button to select Done on the LCD screen. The blue Wi-Fi Direct icon is displayed on the LCD screen and indicates if Wi-Fi Direct is enabled on the product.

     Note: If the Wi-Fi Direct icon is displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again.