Support Printers All-In-Ones WorkForce Series Epson WorkForce ST-C2100

How do I connect my WPS-enabled wireless router to my product?

  • See below.

    Using WPS to Connect to a Network

    If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network.
    1. Press the WPS button on your router.
    2. On the product, press the  home button, if necessary.
    3. Press the arrow buttons to select Settings > Network Settings > Wi-Fi Setup > Wi-Fi (Recommended).
    4. Press the OK button to select Proceed.
    5. Press the arrow buttons to select Push Button Setup (WPS) and press the OK button.
    6. Follow the instructions on the LCD screen to complete WPS setup. If the network connection is successful, the blue Wi-Fi icon is displayed on the LCD screen.

      Note: If the blue Wi-Fi icon is not displayed on the LCD screen, repeat these steps to try again.

Published:  14-Oct-2021 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.