I refilled the ink tanks after they were expended, but my nozzle check pattern still prints with gaps. What should I do?

  • The ink tubes may need to be filled with ink. Flush the ink tubes as instructed below.

    Power Cleaning Using the Product Control Panel

    You can run a Power Cleaning using the control panel on your product.

    Note: After a Power Cleaning, you must wait at least 12 hours before running another Power Cleaning.

    1. Make sure there are no errors on the LCD screen and the output tray is extended.
    2. Visually check the ink levels and make sure each ink tank is at least one-third full.

      Caution:
      If you run a Power Cleaning when the ink levels are low, you may damage the product.

    3. Load a few sheets of plain paper in the product.
    4. Press the  home button, if necessary.
    5. Select Maintenance and press the OK button. You see a screen that looks like this:

    6. Select Power Cleaning and press the OK button.
    7. Follow the instructions on the LCD screen to run the Power Cleaning.
    8. When the Power Cleaning is finished, run a nozzle check.

    If the print quality did not improve, turn off the product and wait at least 12 hours before running another Power Cleaning.

    If the print quality does not improve after running the Power Cleaning utility multiple times, contact Epson for support.

Published:  12-Aug-2021 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.