I still see white or dark lines in my printout after cleaning the print head three times. What should I do?

• If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head several times, you can run a Power Cleaning.

  If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12 hours before running another Power Cleaning.

  Caution:
  Running a Power Cleaning consumes a lot of ink, so you should run it only if necessary. Make sure each ink tank is at least one-third full before running a Power Cleaning, or it may damage the product. Power Cleaning may cause the ink pads to reach their capacity sooner. When an ink pad reaches the end of its service life, the product stops printing and you must contact Epson for support.

  Caution:
  Power Cleaning may cause the ink pads to reach their capacity sooner. When an ink pad reaches the end of its service life, the product stops printing and you must contact Epson for support.

  Related information
  Refilling Ink
  

  Power Cleaning Using the Product Control Panel

  You can run a Power Cleaning using the control panel on your product.

  Note: After a Power Cleaning, you must wait at least 12 hours before running another Power Cleaning.

  1. Make sure there are no errors on the LCD screen and the output tray is extended.
  2. Visually check the ink levels and make sure each ink tank is at least one-third full.

     Caution:
     If you run a Power Cleaning when the ink levels are low, you may damage the product.

  3. Load a few sheets of plain paper in the product.
  4. Press the  home button, if necessary.
  5. Select Maintenance and press the OK button. You see a screen like this:
     
  6. Select Power Cleaning and press the OK button.
  7. Follow the instructions on the LCD screen to run the Power Cleaning.
  8. When the Power Cleaning is finished, run a nozzle check.

  If the print quality did not improve, turn off the product and wait at least 12 hours before running another Power Cleaning.

  If the print quality does not improve after running the Power Cleaning utility multiple times, contact Epson for support.

  Related tasks
  Checking the Nozzles Using the Product Control Panel
  Loading Paper in the Rear Paper Feeder
  Related references
  Where to Get Help
  Related information
  Refilling Ink
  

  Power Cleaning Using a Computer Utility

  You can run a Power Cleaning using a utility on your Windows or Mac computer.

  Note: After running a Power Cleaning, you must turn off the product and wait at least 12 hours before running another Power Cleaning.

  1. Make sure there are no errors on the LCD screen and the output tray is extended.
  2. Load a few sheets of plain paper in the product.
  3. Do one of the following:
     • Windows: Access the Windows Desktop and right-click the icon for your product in the right side of the Windows taskbar, or click the up arrow and right-click . Select Printer Settings and click the Maintenance tab.
     • Mac: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility.
  4. Select Power Cleaning. You see a window like this:
     
  5. Follow the on-screen instructions to run a Power Cleaning.
  6. When Power Cleaning is finished, run a nozzle check.
  If print quality has not improved after running Power Cleaning, wait for at least 12 hours without printing, and then print the nozzle check pattern again. Run Print Head Cleaning or Power Cleaning again depending on the printed pattern. If quality still does not improve, contact Epson support.
  
  Related tasks
  Cleaning the Print Head Using a Computer Utility
  Loading Paper in the Rear Paper Feeder
  Related references
  Where to Get Help
  Related information
  Refilling Ink