How do I scan using my product's control panel?

• You can scan an original and save it to a connected computer using your product's control panel. The computer must be connected using a USB cable or connected to the same network as your product.

  You can save the scanned file as a JPEG or PDF file, or attach it to an email. You can also set up custom scan settings using Event Manager and automatically scan using those settings on your product control panel.

  Note: Be sure you have installed Epson Scan 2, Epson ScanSmart, and Event Manager on your computer before scanning to your computer.

  1. Place your original on the product for scanning.
  2. Press the  home button, if necessary.
  3. Select Scan. You see a screen like this:
     
     
  4. Select Computer.
  5. Select OK to close the information screen, if necessary.
  6. Select Select a computer.You see a screen like this:
     
     
  7. Do one of the following:
     • If your computer is connected to your product over a network, select a connected computer from the displayed list. (If your computer is not listed, select Search Again.)
     • If your computer is connected to your product using a USB cable, select USB Connection.
  8. Select Preview on Computer and choose one of the following options:
     • Preview on Computer to preview the scanned scanned image on a computer before saving the image.
     • Save as JPEG to save the scanned scanned image as a JPEG file.
     • Save as PDF to save the scanned document or image as a PDF file.

     Note: You can customize the settings for each of the options above using Event Manager.

  9. Select Save to start scanning.
  Related tasks
  
  • Changing Default Scan Job Settings
  Related information
  
  • Placing Originals on the Product