How do I check my product’s network status?

• You can use a web browser to check the operating status of the product with the product’s built-in Web Config Utility, or you can print a network connection report to diagnose connection problems with the product on your network. See below.

  Accessing the Web Config Utility

  You can select your product's network settings and confirm its operating status using a web browser. You do this by accessing your product's built-in Web Config utility from a computer or other device that is connected to the same network as your product.

  Note: You can also access the Web Config utility from the product information area in the Epson Smart Panel app.

  1. Check your network status.
  2. Note your product's IP address.
  3. On a computer or other device connected to the same network as your product, open a web browser.
  4. Enter your product's IP address into the address bar.

     Note: The printer uses a self-signed certificate when accessing HTTPS. This may cause a warning message when you access Web Config. This does not indicate a problem and can be ignored.

  You see the available Web Config utility options.Related tasks
  
  • Printing a Network Status Sheet

  Printing a Network Connection Report

  You can print a network connection report to view solutions to any problems you may have using your product on a network.
  1. Make sure a few sheets of plain paper are loaded in the lower cassette.
  2. Press the  home icon, if necessary.
  3. Select Settings. You see a screen like this:
     
     
  4. Select Network Settings > Connection Check. You see a screen like this:
     
     
  5. Select Print Check Report to print the network connection report.
  Examine any error codes and solutions shown on the network connection report.Related reference
  
  • Network Software Cannot Find Product on a Network
  • Cannot Print Over a Network