Support Wearables ProSense Epson ProSense 347

The product stops measuring my activity when I stop moving during a workout. What should I do?

  • Measurement pauses temporarily if the AT Pause or AT REST setting is turned on and the product detects that you have stopped moving. The AT Pause setting is available for the Run, Bike, Indoor Run, Other 1, and Other 2 workout modes. The AT REST setting is available for the Pool Swim workout mode.

    If you do not want measurement to pause during a workout, do the following to turn off the AT Pause or AT REST setting:

    1. Press down on the Time screen until the Run, Bike, Indoor Run, Other 1, Other 2, or Pool Swim workout mode appears.
    2. Press Enter, select AT Pause or AT REST, and then press Enter again.
    3. Select OFF and press Enter.
    4. Press and hold back for at least two seconds to return to the Time screen.

    Note: Turning off the setting for one mode does not turn it off for all modes. If you do not want measurement to pause during any workout, you must turn off the AT Pause or AT REST setting for each workout mode the setting is available for.

    You can also use the Start/Stop button to turn off the AT Pause or AT REST setting for the quick start workout mode, if applicable. Press Start/Stop on the Time screen and press it again to skip GPS positioning, if necessary. Then press Enter and select AT Pause or AT REST > OFF.

Published:  30-Aug-2017 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.