My printout has incorrect colors. What should I do?
-
If your printouts have incorrect colors, try these solutions:
- Make sure the Advanced B&W Photo, Black/Grayscale or Grayscale setting is not selected in your printer software.
- Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
- The ink cartridges may be old or low on ink, and you may need to replace them.
- After you print, the colors in your printout need time to set as the ink dries. During this time, the colors may look different than you expect. To speed up drying time, do not stack your printouts on top of each other.
- Your printed colors can never exactly match your on-screen colors. However, you can use a color management system to get as close as possible. Try using the color management options in your printer software.
- Try turning off the PhotoEnhance setting in Windows.
- Try adjusting the Gamma setting.
- For best results, use genuine Epson ink and paper.
Print Head Nozzle Check
Print Head Cleaning
Related tasks
Selecting Basic Print Settings - Windows
Selecting Basic Print Settings - OS X
Selecting Print Layout Options - Windows
Selecting Additional Settings - Windows
Managing Color - OS X
Related references
Available Epson Papers
Published: 21-Mar-2016
Was this helpful? Thank you for the feedback!