Part of my image is blurred or out of focus. What should I do?
Adjust the focus ring on the projector. Adjust the Brightness and Contrast settings on the Video main menu. If you are viewing a computer image, also try adjusting the Comp Tracking and Comp Sync buttons on the projector's control panel. You can also use the on-line Help menu (accessed by pressing the Help button on the control panel of the projector) to assist you with the adjusting of all of the previously mentioned settings.There may be dirt or smears on the lens. Clean the lens as described in your User's Guide. Also make sure the projector is placed correctly to the screen. It may be too close or too far away. Refer to the User's Guide for placement information.
Was this helpful? Thank you for the feedback!