Home Support Projectors PowerLite Series Epson PowerLite 61p

I see the message No Signal. What should I do?

  • Check the following:
    • Make sure the cables are correctly connected to your computer or video source.
    • Make sure the power to your computer or video source is turned on.
    • If you've connected a computer and one or more video sources, you may need to press the Source Search button on the projector or the Comp 1, Comp 2, S-video, or Video button on the remote control to select the correct image source. Allow a few seconds for the projector to sync up after pressing the button.
    • If you've connected a laptop computer, make sure it's set to display on an external monitor.
Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​