My image has a blue cast when I connect my video equipment to my product with a VGA connection. What should I do?
The problem could be caused by the connection or configuration of your video equipment. Check the following:
- Make sure your component video cable is properly connected. The connectors on the cable are color-coded. The red, green, and blue connectors should be attached to the red, green, and blue component video-out connectors on your equipment and the red, green, and blue component video-in connectors on the projector.
- Make sure the projector's Input Signal setting is set correctly to match the output signal of your connected video equipment.
Published: 16-Feb-2007 Was this helpful? Thank you for the feedback!