How should I transport my product?

• Epson MovieMate contains many glass and precision parts. If you need to transport it, follow these guidelines to prevent damage:
  
  Note: Epson shall not be liable for any damages incurred during transportation.
  • When shipping Epson MovieMate for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials, placing plenty of cushioning around Epson MovieMate. Be sure the carrier is capable of transporting fragile equipment and is aware that MovieMate is fragile.
  • If you move Epson MovieMate from a cold environment into a warm room, condensation (moisture) may form internally or on the lens surface. To avoid damage that might be caused by condensation, wait approximately an hour before using Epson MovieMate. If condensation forms, turn off the power, then wait an hour or two before use.
  • When you are hand-carrying Epson MovieMate, make sure all discs are ejected, the lens cover is closed, and the feet are retracted.
  • Lift Epson MovieMate as shown below. Make sure the top section is locked in place. Be careful not to open the interface cover while you are carrying Epson MovieMate.