Support Projectors PowerLite Series Epson PowerLite 1730W

I see static or noise in the image. What should I do?

  • Check the following:
    • If you're using a computer cable longer than 6 feet (2 meters), or an extension cable, the image quality may be reduced.
    • Keep your computer and video cables away from the power cord as much as possible to prevent interference.
    • If you're using an extension cable, you may pick up interference if the cable is not adequately shielded. You may need to use a signal amplifier for longer cables.
    • The video signal may be split between the computer and the projector. If you notice a decline in the projected image quality when the image is displayed simultaneously on your notebook computer and the projector, turn off the notebook's LCD display.
    • Make sure the correct input signal is selected in the Signal menu. See Adjusting Signal Settings for details.
    • If you're projecting from a composite or S-Video source, check the Video Signal setting in the Signal menu. In most cases, leave it set to Auto. If you're using a 60-Hz PAL video source, change this setting to PAL60. See Adjusting Signal Settings.
    • If you're viewing video through the S-Video or composite inputs, and you notice flickering or horizontal lines, turn on the Progressive setting. If you're viewing still images, turn this setting off. See Adjusting Signal Settings.
    • If you've used the Keystone adjustment, you may need to decrease the Sharpness setting in the Image menu. See Adjusting the Image for details.
    • Make sure the cables are securely connected at both ends.
    • Select the correct resolution and vertical refresh rate. See Compatible Video Formats.
    • If you're projecting from a computer, press the Auto button on the remote control or the Enter button on the projector to adjust tracking and sync automatically. If that doesn't work, try adjusting the Sync and Tracking settings in the Signal menu. See Adjusting Signal Settings.
    • If you're projecting from a DVD player, VCR, or other video source, make sure the correct output signal is selected on the device.
Published:  5-Nov-2008 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.