Support Projectors PowerLite Series Epson PowerLite Pro Cinema 7500 UB

My image has a blue cast when I connect my video equipment to my product with a VGA connection. What should I do?

  • The problem could be caused by the connection or configuration of your video equipment. Check the following:
    • If you are using a component video cable, make sure the cable is properly connected. The connectors on the cable are color-coded. The red, green, and blue connectors should be attached to the red, green, and blue component video-out connectors on your equipment and the red, green, and blue component video-in connectors on the projector.
    • Make sure the projector's Input Signal setting is set correctly to match the output signal of your connected video equipment.
    • Make sure the connected video equipment is set up to output video to component video.
Published:  24-Nov-2008 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.