No image appears. What should I do?

• Check the following:
  • Make sure the projector is turned on (the   light is green and not flashing). If the   light is flashing green, wait for the projector to warm up.
  • Make sure the lens cover slide is open.
  • Make sure the region code on the DVD is ALL, 1, or labeled NTSC.
  • Check the  lamp warning light. If it is flashing orange or red, you need to replace the lamp. For instructions see Replacing the Lamp.
  • The Screensaver feature turns off the picture if a still image is projected for more than 30 minutes. See Saving Power for instructions on adjusting Sleep settings.
  • If you're using an external video device, check the following:
  • Make sure the external video equipment is turned on, connected, and set up correctly.
  • Press the  button on the projector or the remote control.
  • Press the  or Play button on the connected video device.
  Published:  25-Sep-2008 Was this helpful? Thank you for the feedback!

  Was this helpful?

  Yes

  No

  Please tell us why this was not helpful.

  Characters left:

  Submit