Support Projectors PowerLite Series Epson PowerLite 1925W

My networked product is displaying an Event ID error code. What should I do?

  • If the Event ID option on the Info menu displays a code number, check the following list of Event ID codes for the solution to the projector problem associated with the code.

    Event ID CodeCause and Solution
    0432The EasyMP Network Projection program did not start. Turn the projector off and then on again.
    0435
    0434Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again.
    0482
    0484
    0485
    0433Cannot display the transferred images. Restart the EasyMP Network Projection program.
    0481Communication with computer was disconnected. Restart the EasyMP Network Projection program.
    0483The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again.
    04FE
    0479A projector system error occurred. Turn the projector off and on again.
    04FF
    0891Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID.
    0892The WPA/WPA2 authentication does not match. Make sure the wireless network security settings are correct.
    0893The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct.
    0894Communication with unauthorized access point was disconnected. Contact your network administrator.
    0898Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you are using DHCP, turn off the DHCP setting in the Network Menu.
    0895A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not resolve the problem, contact Epson for help.
    0899
Published:  26-Jun-2012 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.