I see the message No Signal. What should I do?
The projector has an on-screen help system you can use to solve this problem; see Using On-Screen Help. If the on-screen help does not solve the problem, check the following:
- Make sure the cables are correctly connected. See Connecting to a Computer.
- Make sure the power to your computer or video equipment is turned on.
- If you've connected a computer and one or more video sources, you may need to press the Source Search button on the projector or the remote control or one of the Source buttons on the remote control to select the image source. Allow a few seconds for the projector to sync up after pressing the button.
- Try restarting your computer.
- If you've connected a laptop computer with a VGA cable, make sure it's set to display on an external monitor. If you're using a PC notebook:
- Press the function key that lets you display on an external monitor. It's often labeled with an icon such as , but it may also be labeled CRT/LCD. You may have to hold down the Fn key while pressing it. Check your laptop's manual or online help.
On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time. Allow a few seconds for the projector to sync up after pressing it.
If that doesn't work, press the ? Help button on the projector for a list of laptop brand-specific button combinations you can press to switch to an external display.
- If the function key doesn't let you display simultaneously on both screens, you might need to use the Display utility in the Windows Control Panel to make sure that both the LCD screen and external monitor port are enabled. From the Windows Control Panel, open the Display utility. Click the Settings tab, then click Advanced. The method for adjusting the setting varies from computer to computer; you may need to click a Monitor tab, then make sure the external Monitor port is set as your primary display or enabled. See your computer manual or online help for details.
- Make sure the projector is connected to your Macintosh.
- Select System Preferences from the Apple menu and click Displays.
- Click Detect Displays. Macintosh OS X 10.6:
- Click Show Displays in menu bar. Other versions of Macintosh OS X:
- To display the entire desktop on both your projector screen and LCD screen, click the Arrangement or Arrange tab. (If you don't see this tab, make sure it isn't hidden by another window.) Click Mirror Displays in the lower corner of the screen. One of the monitor icons automatically moves on top of the other.
Published: 19-Jan-2010 Was this helpful? Thank you for the feedback!