Support Projectors PowerLite Series Epson PowerLite 1760W

Only part of the picture is displayed or the image looks distorted. What should I do?

  • Try the following:
    • If the computer is connected to the projector with a VGA cable, press the Auto button on the remote control to optimize the image signal.
    • Try adjusting the image position using the Position setting.
    • If the computer is connected to the projector with a VGA or HDMI (PowerLite 1760W/1770W/1775W only) cable, press the Aspect button on the remote control to select a different image aspect ratio.
    • If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button to return to a full display.
    • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)
    • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.)
Published:  26-Oct-2010 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.