My networked product is displaying an Event ID error code. What should I do?

If the Event ID option on the Info menu displays a code number, check the following list of Event ID codes for the solution to the projector problem associated with the code.



Event ID Code	Cause and Solution
0432	The EasyMP Network Projection program did not start. Turn the projector off and then on again.
0435
0434	Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again.
0482
0484
0485
0433	Cannot display the transferred images. Restart the EasyMP Network Projection program.
0481	Communication with computer was disconnected. Restart the EasyMP Network Projection program.
0483	The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again.
04FE
0479	A projector system error occurred. Turn the projector off and on again.
04FF
0891	Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID.
0892	The WPA/WPA2 authentication does not match. Make sure the wireless network security settings are correct.
0893	The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct.
0894	Communication with unauthorized access point was disconnected. Contact your network administrator.
0898	Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you are using DHCP, turn off the DHCP setting in the Network Menu.
0895	A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not resolve the problem, contact Epson for help.
0899