text.skipToContent text.skipToNavigation
Home Support Projectors PowerLite Series Epson PowerLite 420

Part of my image is blurred or out of focus. What should I do?

    Try the following solutions:
    • Adjust the image focus.
    • Clean the projector lens.
    • Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.
    • Position the projector close enough to the screen, and directly in front of it.
    • Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
    • Adjust the Sharpness setting to improve image quality.
    • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync. If any bands or overall blurriness remains, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
    Related references
    Input Signal Settings - Signal Menu
    Image Quality Settings - Image Menu
    Projection Distance
    Related tasks
    Focusing the Image Using the Focus Ring
    Cleaning the Lens
Published:  15-Nov-2011 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address