Can my product do rear projection?

• Yes. You can change the projection mode using the remote control or by changing a menu setting.

  Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly.

  • Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down from a wall or ceiling mount. This mode should also be used when you mount the projector vertically on a table to create an interactive work surface.
  • Front lets you project from a table in front of the screen.
  • Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the wall or ceiling and behind a translucent screen.
  • Rear flips the image horizontally to project from behind a translucent screen.

  Note: The two Rear modes cannot be used with the interactive pens.

  You can change the projection mode using the remote control or by changing the Projection setting in the Extended menu.

  Related references
  Changing the Projection Mode Using the Remote Control
  Changing the Projection Mode Using the Menus
  Projector Setup Settings - Extended Menu