Support Projectors Cinema Series Epson PowerLite Home Cinema 3020e

How do I secure the HDMI cable on my product?

  • Fasten the HDMI cable to the projector using the included cable clip. Do the following:
    1. Connect the HDMI cable to one of the HDMI ports on the projector.
    2. Insert the end of the cable clip anchor into the cable clip hole near the HDMI port, as shown below.
    3. Place the open cable clip around the HDMI cable, but don't lock it into place.
    4. Slide the cable clip towards the projector and lock the clip onto the HDMI connector.
    To remove the cable clip, unlock the clip and disconnect the HDMI cable. Then pinch the side of the cable clip anchor and carefully pull it out of the cable clip hole.

    Note: The cable clip works with most conventional round HDMI cables. The cable clip may not work with non-round or thick HDMI cables.
Published:  30-Nov-2012 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.