text.skipToContent text.skipToNavigation
Home Support Projectors Cinema Series Epson PowerLite Pro Cinema 6020UB

I see static or noise in the image. What should I do?

    Try the following solutions:

    • Make sure the Input Signal is set correctly for your connected video equipment. See Other Setup Options.
    • If you're viewing still images and you notice flickering or horizontal lines, turn on the Progressive setting. See Sharpness and Picture Quality Settings.
    • Make sure your cables are securely connected at both ends.
    • If you're using an extension cable, you may pick up interference if the cable is not adequately shielded. You may need to use a signal amplifier for longer cables.
    • If you're using a cable that is longer than 24 ft, try using a shorter cable for testing purposes.
    • If you're displaying the same image on your computer and projector screen, try turning off your laptop's LCD display. See You're using a computer and no picture appears on the screen.
Published:  18-Sep-2012 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address