Support Projectors Cinema Series Epson PowerLite Home Cinema 3600e

How do I setup WirelessHD connection?

  • See below.

    Connecting the WirelessHD Transmitter

    You can connect up to five HDMI input sources and one HDMI output source to your WirelessHD transmitter.
    1. Plug the AC adapter into the AC input port on the WirelessHD transmitter and into an electrical outlet.
    2. Connect HDMI cables to your video devices and to the HDMI input ports on the side and back of the WirelessHD transmitter.

      Note: You can connect an MHL-compatible smartphone or tablet to the HDMI 5 / MHL (IN) port on the WirelessHD Transmitter.

    3. To use the WirelessHD transmitter as a pass-through device to a television or other display, connect an HDMI cable to the display device and to the HDMI (OUT) port on the back of the transmitter.

    WirelessHD Transmitter Placement

    Keep these considerations in mind as you select a WirelessHD transmitter location:

    • Orient the WirelessHD transmitter with its lights facing the front of the projector.
    • Place the WirelessHD transmitter within 32 feet (10 m) of the projector and in the same room.
    • Ensure there is a clear path between the projector and the WirelessHD transmitter.
    • Avoid placing the WirelessHD transmitter in an area with many large or metal objects. Do not place the WirelessHD transmitter on a metal surface, as this may interfere with the signal.
Published:  28-Aug-2014 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.