Support Projectors Pro Series Epson Pro G7100

How do I set up my product?

  • You can place the projector on almost any flat surface to project an image.

    You can also install the projector in a ceiling mount if you want to use it in a fixed location.

    Keep these considerations in mind as you select a projector location:

    • Place the projector on a sturdy, level surface or install it using a compatible mount.
    • Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents.
    • Position the projector within reach of a grounded electrical outlet or extension cord.

    Projector Setup and Installation Options

    You can set up or install your projector in the following ways:

    Front

    Rear

    Front ceiling

    Rear ceiling

    Note: Be sure to leave at least 20 inches (50 cm) of space in front of the air exhaust and intake vents and, when setting up multiple projectors, 20 inches (50 cm) of space between the projectors.

    If you mount the projector to the ceiling, install it within the following angles:

    • Vertically: Any angle in a complete 360 degree circle.
    • Horizontally: Within the adjustment range of the rear adjustable feet.

    If you project from the ceiling or from the rear, select the correct Projection setting and, if necessary, turn on the Inv Direction Button setting. If you installed the projector at an angle, select the Direction setting.

    Note: Selecting an incorrect Direction setting may shorten the lamp life.

    Related references
    Projector Setup Settings - Extended Menu
Published:  21-Apr-2016 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.