Support Projectors Pro Series Epson Pro G7400U

I see the message Select the Direction setting in the Configuration menu that matches the orientation of the projector with the projector placed in an upright position. What should I do?

  • This message appears when the projector is installed in a position that does not match the Direction setting.

    Note: The error message disappears 20 seconds after you adjust the Direction setting; however, the Lamp light continues flashing orange until the projector icon is adjusted to the proper position or direction.

    Do the following:

    1. Press the Menu button.
    2. Select Extended > Direction > Direction and press Enter.
    3. Set the projector icon to -90 or 90 degrees so it matches the projector's position.
    4. Select Set and press Enter.
    5. Select Portrait Mode and press Enter.
    6. Press the up or down arrow button to select On and press Enter.
    7. Select Return and press Enter to exit the menu.
    8. Carefully rotate the projector 90 degrees so the air filter/intake vent is facing down.
Published:  Dec 14, 2018 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​