Support Projectors PowerLite Series Epson PowerLite Home Cinema 3700

There is no sound. What should I do?

  • If there is no sound when you expect it or the volume is too low or high, try the following solutions:
    • Adjust the projector's volume settings.
    • Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped.
    • Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source.
    • Check the audio cable connections between the projector and your video source.
    • Make sure any connected audio cables are labeled "No Resistance".
    • If you turn the projector on immediately after turning it off, the cooling fans may run at high speed momentarily and cause an unexpected noise. This is normal.
    Related tasks
    Connecting to a Computer for HDMI Video and Audio
    Related references
    Input Signal Settings - Signal Menu
Published:  12-Sep-2016 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.