How do I connect my image source to the product?

• See below.

  Connecting to Computer Sources

  Follow the instructions in these sections to connect a computer to the projector.

  Related tasks
  Connecting to a Computer for VGA Video
  Connecting to a Computer for HDMI Video and Audio
  Connecting to a Computer for 5 BNC Video
  

  Connecting to Video Sources

  Follow the instructions in these sections to connect video devices to the projector.

  Related tasks
  Connecting to an HDMI Video Source
  Connecting to a Component-to-BNC Video Source
  Connecting to a Component Video Source
  

  Connecting to an External Computer Monitor

  If you connected a computer to the projector's Computer or BNC port, you can also connect an external monitor to the projector. This lets you see your presentation on the external monitor even when the projected image is not visible.

  If you want to output images to an external monitor when the projector is turned off, you need to select Communication On as the Standby Mode setting and Always On as the A/V Output setting in the projector's Extended menu.

  Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.

  1. Make sure your computer is connected to the projector's Computer or BNC port.
  2. Connect the external monitor's cable to your projector's Monitor Out port.
      
     

     Note: If you do not see an image on the external monitor, you may need to change the Monitor Out setting in the Extended menu.

  Related tasks
  Connecting to a Computer for VGA Video
  Connecting to a Component-to-BNC Video Source
  Related references
  Projector Setup Settings - Extended Menu