Support Projectors Pro Series Epson Pro L12000Q

The image appears stretched when I project from my computer. What should I do?

  • Try the following:

    • Press the Aspect button on the remote control to set the image aspect ratio to Normal.

      Note: Depending on the input resolution, you may not be able to change the aspect ratio while using an HDMI source. Try changing the output resolution of the input signal device instead.

    • Set the projector's Resolution setting to Auto so the projector automatically identifies the resolution of the input signal. If you are projecting from a computer using a VGA connection, select Wide (for widescreen images) or Normal (for 4:3 ratio images), if necessary.
    • If you are using a VGA connection, set the projector's Auto Setup setting to On so the projector automatically optimizes the computer image quality.
    • Check your computer's display settings, disable dual display so that your image displays through the projector only, and set the resolution within the projector's limit. (See your computer manual for details.)
    • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting. (See your software help for details.)
    • Set the Scale setting to Off in the projector's Signal menu.
    Related references
    Input Signal Settings - Signal Menu
Published:  6-Dec-2019 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.