Support Projectors PowerLite Series Epson PowerLite L610W

How do I change the image source?

  • If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other.

    Note: If you turned on the Auto Source Search setting in the Extended menu, the projector automatically switches to another detected image source if the signal to the current image source is lost.

    1. Make sure the connected image source you want to use is turned on.
    2. For video image sources, insert a DVD or other video media and press its play button, if necessary.
    3. Do one of the following:
      • Press the Source Search button on the projector or remote control until you see the image from the source you want.

      • Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources.

        1 Computer port (1 or 2) source
        2 HDMI (1, 2, or HDBaseT*) or Video source
        3 USB port (external devices) source
        4 LAN (Ethernet, Screen Mirroring*) source

        *select projector models only

      • Press the Home button on the remote control and select your image source.

    Related references
    Projector Setup Settings - Extended Menu
Published:  12-Jul-2018 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.