Support Projectors Pro Series Epson Pro L30000U

The image is too dark or light, or the colors are incorrect. What should I do?

  • If the projected image is too dark or light, or the colors are incorrect, try the following solutions:

    • Check your video source settings.
    • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, Advanced, and Color Saturation.
    • Make sure you selected the correct Input Signal, Video Range, HDR 10 Setting, and HLG Setting options on the Signal menu.
    • Make sure you selected the correct Gamma or RGBCMY setting in the Image menu.
    • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables.
    • Make sure the Brightness Settings options in the Settings menu are set correctly.
    • Position the projector close enough to the screen.
    • When using multiple projectors, make sure Light Source Calibration in the Reset menu is set correctly in all of the projectors. If light source calibration is performed only in some of the projectors, the white balance and the brightness level of the projected image may differ between the projectors.
    Related tasks
    Changing the Color Mode
    Running Light Source Calibration
    Related references
    Input Signal Settings - Signal Menu
    Image Quality Settings - Image Menu
    Projector Feature Settings - Settings Menu
    Projector Reset Options - Reset Menu
Published:  10-Sep-2020 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.