Can I brighten the image when I project a 4K HDR signal?
Yes, try the following:
- Position the projector close enough to the screen.
- Remove any light from the room.
- Press the Color Mode button on the remote control to try different color modes for the image and environment.
- Press the HDR button on the remote control, then press Enter to select the Dynamic Mode setting and set it to either HLG or HDR10. Press the Esc button and then select either the HLG Setting or HDR10 Setting, depending on which HDR mode you selected. Use the left or right arrow button to increase or decrease the brightness setting between 1 and 16.
Note: Selecting HLG or HDR10 for the Dynamic Range setting may affect the contrast ratio.
Published: 3-Apr-2019 Was this helpful? Thank you for the feedback!