The product's status lights don't flash or turn on. What should I do?
Check the following:
- Make sure the power cord is plugged into a functional outlet.
- Make sure the product is powered on and projecting an image.
- Make sure the lights are enabled. To enable the lights, press the Menu button on the remote control and select Extended > Operation > Illumination > On.
- Make sure the Child Lock setting is off. To turn off this setting, press the Menu button on the remote control and select Settings > Lock Settings > Child Lock > Off.
Note: You can use the remote control to control the projector when the control panel buttons are locked.
Published: 17-Oct-2019 Was this helpful? Thank you for the feedback!