Can I turn on my product over a network?
Yes, you can turn on the product over a network with the Epson Projector Management software or with the projector's web control home page via a web browser. To enable this feature, do the following:
- Make sure to set the Standby Mode setting to Communication On in the projector's Operation menu.
- Set the Port setting to Wireless LAN or Wired LAN, depending on your connection type.
- Make sure the Priority Control Interface is set to the same connection type. Select Network > Network Settings > Priority Control Interface then select Wireless LAN or Wired LAN, depending on your connection type.
Published: 12-Dec-2019 Was this helpful? Thank you for the feedback!