Part of my image is blurry or out of focus. What should I do?
If the projected image is fuzzy or blurry, try the following solutions:
- Adjust the image focus.
- Clean the projector lens.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.
- Position the projector close enough to the screen.
- Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
- Turn on automatic keystone adjustment in the Settings menu (if available for your product).
- Adjust the Sharpness setting in the Image menu to improve image quality.
- If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings in the Signal menu.
- If you are projecting from a computer, try using a lower resolution or try to match the projector's native resolution.
Focusing the Image Using the Focus Ring
Cleaning the Lens
Image Quality Settings - Image Menu
General Projector Specifications
Published: 21-Jan-2021 Was this helpful? Thank you for the feedback!