Support Projectors PowerLite Series Epson PowerLite W70

The product's status lights don't flash or turn on. What should I do?

  • Check the following:

    • Make sure the power cord is plugged into a functional outlet.
    • Make sure the product is turned on and projecting an image.
    • Make sure the lights are enabled. To enable the lights, press the Menu button on the remote control and select Settings > Operation > Illumination > On.
    • Make sure the Child Lock setting is off. To turn off this setting, press the Menu button on the remote control and select Settings > Operation > Child Lock > Off.

      Note: You can use the remote control to control the projector when the control panel buttons are locked.

    • Make sure the Control Panel Lock Setting is off. To turn off this setting, press the Menu button on the remote control and select Settings > Operation > Control Panel Lock > Off.
Published:  26-May-2020 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.