Support Projectors LightScene Series Epson LightScene EV-115

How do I configure my product for rear and/or ceiling placement?

  • Do the following:

    1. Press the Menu button.
    2. Select the Extended menu and press Enter ().
    3. Select Projection and press Enter ().
    4. Select one of the following settings:
      • Front (default setting) lets you project from a table in front of the screen.
      • Front/Upside Down flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
      • Rear flips the image horizontally to project from behind a translucent screen.
      • Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the ceiling and behind a translucent screen.

    You can also change the projection mode from Front to Front/Upside Down or from Rear to Rear/Upside Down by pressing and holding the A/V Mute button on the remote control for 5 seconds or until an image appears.

    Note: To project from overhead, you'll need the included direct mount hardware. If you are installing the projector on a lighting track, use only the optional lighting track mount .

Published:  28-Jan-2021 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.