The displayed image is not rectangular. What should I do?

• If the projected image is not evenly rectangular, try the following solutions:

  • Place the projector directly in front of the center of the screen, facing it squarely, if possible.
  • If you are mounting the projector from the ceiling, use the adjustment controls on the mount at the time of installation.
  • Try to fix the image using lens shift before adjusting the Keystone setting.
  • Adjust the Quick Corner setting to correct the image shape.
  • Adjust the Arc Correction setting to correct the image shape projected on a curved surface.
  • Adjust the Point Correction setting to correct slight distortion that affects a portion of the screen.
  Related tasks
  Correcting Image Shape with H/V-Keystone
  Correcting Image Shape with Quick Corner
  Correcting Image Shape with Arc Correction
  Correcting Image Shape with Point Correction