How do I connect my projector wirelessly to my Windows or Mac computer?

• Install the Epson iProjection (Windows/Mac) software on the computer from which you will project. The projector has built-in wireless functionality, but if you want to use multiple wireless connection methods (i.e., simple AP mode and infrastructure mode) at the same time, you should also install the optional wireless LAN module as instructed in your product's online User's Guide.

  Note: With Windows, you can also set up a wireless connection using a Quick Wireless Connection USB Key and the Epson iProjection software, or with Simple AP set to ON,you can send images to your projector from mobile devices such as laptops, smartphones, and tablets using Miracast technology. You will need a USB flash drive to create a Quick Wireless Connection USB Key. See your product's online User's Guide for more information.

  After you install software and the wireless LAN module, if necessary, do the following to select the network settings on your projector:

  Before you can project from your wireless network, you must select the network settings for the projector using its menu system.
  1. Turn on the projector.
  2. Press the Menu button.
  3. Select the Management menu and press  Enter.
     
     
  4. Select On as the Wireless LAN Power setting.
  5. Select the Network menu and press  Enter.
     
     
  6. Select Network Settings and press  Enter.
  7. Select Projector Name and enter a name up to 16 alphanumeric characters long to identify the projector on the network.
  8. Set the Priority Control Interface setting to Wireless LAN.
  9. Select the connection method:
     • To connect directly to a wireless device (Simple AP mode), set the Simple AP setting to On and go to step 17.
     • To connect to a device via a wireless network router (infrastructure mode), set the Simple AP setting to Off and go to the next step.
     • If you installed the optional wireless LAN module and want to use both connection methods, set the Simple AP setting to On and go to the next step.
  10. Select the Wireless LAN menu and press  Enter.
      
      
  11. Select Search Access Point and press  Enter. The projector searches for wireless networks.
  12. Select the network you want to connect to and enter the password, if necessary.

      Note: If you need to assign the SSID manually, select SSID to enter the SSID. The SSID and password are case-sensitive. Make sure you enter them in the correct case.

  13. Select IP Settings and press  Enter.
  14. Select your IP settings as necessary:
      • If your network assigns addresses automatically, turn on the DHCP setting.
      • If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address as needed.

      Note: Do not use these addresses: 0.0.0.0, 127.x.x.x, 192.0.2.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255) for IP Address, 255.255.255.255 or 0.0.0.0 through 254.255.255.255 for Subnet Mask, and 0.0.0.0, 127.x.x.x or 224.0.0.0 through 255.255.255.255 for Gateway Address. For DNS Server addresses, do not use the following IP addresses: 127.x.x.x (where x is a number from 0 to 255). When these settings are not set, DNS server information is acquired using DHCP.

      Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press  Enter.

  15. To prevent display of the IP address on the network information screen, turn off IP Address Display.
  16. Select Return and press  Enter to return to the Network Settings menu.
  17. Select the Network Projection menu and press  Enter.
      
      
  18. Turn on the Projector Keyword setting if you want to prevent access to the projector by anyone not in the room with it.

      Note: The projector displays a random keyword that you must enter from a computer using the Epson iProjection (Windows/Mac) software to access the projector.

  19. Set the Epson iProjection setting to On.
  20. Select the following options as necessary:
      • SSID Display lets you select whether to display the projector's SSID on the standby screen and Home screen.
      • Display LAN Info lets you select how the projector displays network information. You can select an option to display a QR code that lets you quickly connect your iOS or Android devices with the Epson iProjection app.
      • Moderator Password lets you enter a password up to 4 numbers long for accessing the projector as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app.

        Note: Make a note of the password and keep it in a safe place. If you forget the password, you can select Reset Network Settings from the projector's Network menu, but all of the passwords for settings in the Network menu will be reset.

      • Keyword Interrupt Display lets you select whether to display a projector keyword on the projected image when accessing the projector using Epson iProjection.

      Note: Use the displayed keyboard to enter the password and keyword. Press the arrow buttons on the remote control to highlight characters and press  Enter to select them.

  21. When you finish selecting settings, select Return to return to the Network Settings menu.
  22. Select Set and follow the on-screen instructions to save your settings and exit the menus.

  After you complete the wireless settings for your projector, you need to select the wireless network on your computer, or iOS or Android device.

  Note: You can press the LAN button on the remote control to check your network security settings after completing the wireless settings.